Structural EngineeringServices
Supporting every stage of an asset's lifecycle through six specialist structural engineering service lines. Every engagement delivers structural clarity that lets asset owners act with confidence.
Common starting points: construction condition surveys and pre and post-construction condition surveys before works near an existing asset, or structural investigation Brisbane engagements with RPEQ-certified structural reporting.
Structural Investigation
Evidence-Based Assessment of Existing Asset Capacity
A structural investigation is a systematic, evidence-based assessment of an existing building's structural capacity and condition through non-destructive testing, material sampling…
Building Condition Survey & Existing Condition Assessment
Structural Condition Survey, Dilapidation Reports & Remaining Capacity Evaluation
A building condition survey evaluates the current state of an existing building, quantifies deterioration, classifies risk, and determines what intervention is warranted. A constru…
Dilapidation Survey & Pre-Construction Reports
RPEQ-Certified Pre-Construction Condition Documentation for Adjacent Properties
A dilapidation survey is a formal pre-construction condition record of neighbouring properties, documenting existing defects before excavation, demolition, piling, or structural wo…
Structural Restoration & Remediation Design
Evidence-Based Structural Restoration, Repair & Strengthening for Existing Assets
Structural remediation design is the engineering of targeted repair, strengthening, or restoration solutions for deteriorated or damaged structures, based on investigation evidence…
Heritage Structural Engineering
Preserving the Past with Present-Day Engineering
Heritage structural engineering is the specialist assessment, analysis, and remediation of heritage-listed and historically significant buildings using materials and methods compat…
Post-Disaster Structural Assessment
Rapid Assessment and Recovery Planning Following Catastrophic Events
Post-disaster structural assessment is the rapid engineering evaluation of a building's structural safety and residual capacity following a cyclone, fire, flood, explosion, or othe…
Form 15 & Form 12 RPEQ Certification
RPEQ Structural Adequacy Certification for Existing Buildings Under Queensland Building Regulations 2021
Form 15 is the RPEQ Structural Adequacy Certificate required under the Queensland Building Regulations 2021, certifying that a structure meets the relevant performance requirements…
Facade & Glazing Investigation
Root Cause Investigation for Facade Failures, Glazing Defects & Cladding Non-Compliance
Facade and glazing failures are rarely what they appear to be. A leak at Level 12 may originate from a failed sealant joint at Level 15. A cracked granite panel may be restraint-in…
Facade & Glazing Remediation Design
Evidence-Based Repair Specifications for Facades, Curtain Walls, Glazing Systems & Building Envelopes
Facade and glazing remediation design starts where investigation ends. TRSC produces remediation specifications that are directly traceable to confirmed root cause findings, not co…
Forensic Engineering
Root Cause Analysis and Expert Structural Failure Investigation
Forensic engineering applies engineering principles to determine the cause and mechanism of structural failure, building defects, and material degradation. Unlike a standard inspec…
Structural Defect Investigation
Evidence-Based Assessment of Building Defects and Damage
Structural defect investigation identifies the type, cause, and severity of defects in existing buildings through systematic inspection, testing, and engineering analysis. When cra…
Concrete Scanning and Non-Destructive Testing
GPR, Ferroscan, and UPV Testing for Existing Structures
Concrete scanning and non-destructive testing (NDT) provides critical information about the internal condition of concrete structures without damaging them. TRSC deploys ground-pen…
Make Safe & Monitor
Every TRSC service is underpinned by the same evidence-based principle: investigate to prove what a structure can do before recommending what it requires. Our Make Safe and Monitor hierarchy ensures that intervention is always proportionate to risk, not to conservative assumption.
This methodology is applied consistently across every service line, from rapid post-disaster response to multi-year monitoring programmes, ensuring that measured data drives every engineering decision.
Explore our methodologyReady to start?
Every engagement begins with a direct conversation with an RPEQ-qualified structural engineer. Contact TRSC to discuss your asset and the most appropriate service to address it.